Unzip the file to a folder on your computer. Remove the microSD card from the AppCam. Insert the microSD card into your computer an adapter may be necessary. Copy the firmware to the root directory of your microSD card. Eject the microSD card and place back into your AppCam. Connect the power to your AppCam. The AppCam will install the firmware. Note: It may be necessary to perform the initial setup again for the AppCam and your mobile phone application.
This installer creates the following driver on your system: v2. Your phone supports up to four handsets, including any handsets supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. All the handsets ring when a call is received. Your phone is compatible with the following Uniden 2.
Please visit our website at www. If you purchase an accessory handset, you must register the handset to the base before use. Accessory handsets will not operate until they are registered. The handset is powered by a rechargeable battery pack.
The battery recharges automatically when the handset is placed in the charger. Set the charger on a desk or tabletop, and place the handset in the charger with the keypad facing forward. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.
Charge the handset battery pack for at least hours before using your new cordless telephone for the first time. If you purchase an accessory handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, preregistered handsets display a handset ID number. If an accessory handset has ever been registered to a base, you must reset the handset before you can register it to a new base.
When you register an accessory handset to the base, the handset ID will be assigned. Note: Before registering any accessory handsets, make sure the accessory handset's battery is fully charged. To register DCX handsets, simply place the accessory handset in the base. If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.
You will. Note: The handset first clears it registration information from the base and then deletes the link to the base from its own memory. If this happens, see Resetting the Handset Without the Base on page For instructions on registering the handset, see page Your handset can store up to names and numbers in your phonebook. Your phone shares memory between your phonebook and Caller ID entries.
Once you store phonebook entries, Caller ID information will not be stored and will only display at time of new incoming call. You cannot store any additional names and numbers unless you delete some of the existing ones. You can also use the phonebook entries or speed dial memory to store a group of numbers up to 20 digits that you may need to enter once your call connects.
This is referred to as chain dialing. See Entering Text from Your Handset on page 12 for. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Table of Contents Table of Contents Basic Setup Activating AutoTalk Handset only Answering a Transferred Call Recording a Voice Memo Traveling Out of Range Terminology Used in this Manual This phone system is expandable: Accessory one base supports a total of four handsets.
The accessory handset is Handset a handset that is compatible with this model. Base The main part of the phone that connects to your phone line and lets you make and receive calls. With this service, you can see the name and number of incoming callers. This or Call service gives you different options Waiting when you have a waiting call. A cradle that comes with an Charger accessory handset and charges the handset battery. It connects to power but does not connect to a phone line.
Apply to registered handsets and the base. If you change something Global under the global menu, you change it for all registered handsets and the settings base. Only one handset can change global settings at a time, and the phone must be in standby. Standby The handset is not in use. If it is off the cradle, no line has been activated.
No dial tone is present. Station Any handset or the base. Talk A telephone line has been activated on the handset or the base, enabling a dial tone. Base charging contacts 9. Message counter LED 2. Base antenna 7. DC IN 9V power jack. You can only view or download manuals with. Sign Up and get 5 for free.
Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual. Buy as many as you need. View and download manuals available only for. Register and get 5 for free. Upload manuals that we do not have and get 1 for each file. Get 1 for every download of your manual. Conference Phone Manuals. Cooktop Manuals.
Copier Manuals. Cordless Drill Manuals. Cordless Telephone Manuals. Digital Camera Manuals. DJ Equipment Manuals. DVR Manuals. Electronic Keyboard Manuals. Film Camera Manuals. Flat Panel Television Manuals. GPS Receiver Manuals. Grill Accessory Manuals. Headphones Manuals. Home Theater System Manuals. IP Phone Manuals. Lawn Mower Accessory Manuals. Marine Radio Manuals.
0コメント